Posts by Mercosity

1) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7809)
Posted 22 Nov 2017 by Mercosity
Post:
Back to the same problems again .. Constant crashes!!

I have no problems on any other project with this card. Gone back to the original driver and still crashes so suspended and sent any excess WUs back.
2) Message boards : News : BOINC Server updated (Message 7744)
Posted 8 Oct 2017 by Mercosity
Post:
It seems that the upgrade/update has taken Moo out of the Gridcoin whitelist as the client can no longer access and acquire stats.

Maybe you could direct the Gridcoin dev team as to where they can acquire stats?
3) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7743)
Posted 8 Oct 2017 by Mercosity
Post:
I used to run the 15.12 drivers but with this instability I updated to the latest driver from AMD directly. I'm also not overclocking at all.

This made it possible to use Wattman to 'boost' the power and make it stable. As far as I'm concerned that's the only benefit.
4) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7733)
Posted 5 Oct 2017 by Mercosity
Post:
Well what do you know ..

Although I had changed nothing and the crashes came out of the blue when I increased the power using Wattman the crashes seem to have stopped.

Touch wood this is the solution but certainly strange that it should suddenly require more oomph ..
5) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7732)
Posted 5 Oct 2017 by Mercosity
Post:
Ok, tried the newest drivers and Moo still crashes my card and hence my machine.

I can't think of anything else to do. Anyone help?
6) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7731)
Posted 4 Oct 2017 by Mercosity
Post:
I've tried the driver before the one I was using and no go either.

I'm gonna try the latest, I found that the card didn't seem to like the new drivers when I got it so I left them alone.

Have you a similar card and have you had similar probs that have been resolved by using the latest?
7) Message boards : Number crunching : Problems running wus on AMD R9 380. Suddenly Moo crashes card. (Message 7729)
Posted 4 Oct 2017 by Mercosity
Post:
I'm suddenly having problems running wus on an AMD R9 380. The wu starts running and suddenly Moo crashes the card.

I've checked the card and it runs fine on all other projects. Even reloaded the driver as I initially thought that maybe there had been an update I hadn't noticed (always use driver version 15.200.1046.0 WHQL) or maybe the driver had become corrupt.
Reset the project as well but no go. So I removed Moo from the BOINC Manager and restarted, then added it again and restarted. Still the same!!

Have there been any changes that weren't announced?

I run an AMD HD 7950 on Moo on another machine and there are no problems there.

Anyone have any advice for me?

Thanks.
8) Questions and Answers : Getting started : Tin nhanh bong da 24h – Link sopcast xem cac tran bong da hom nay (Message 7719)
Posted 31 Aug 2017 by Mercosity
Post:
A not so very interesting diatribe on free football sopcast links ..

A waste of space and probably put here to gain some reaction ..
So I've reacted .. Woot!!
9) Message boards : Number crunching : amd 480 and opencl issues (Message 7707)
Posted 29 Jul 2017 by Mercosity
Post:
Boy oh boy I finally found the solution:


I used regedit.exe in run and all I did was to modify:

HKLM\SOFTWARE\Khronos\OpenCL\Vendors (for 64-bit applications)

and/or

HKLM\SOFTWARE\Wow6432Node\Khronos\OpenCL\Vendors (for 32-bit applications)

These registry keys should contain one REG_DWORD value for each OpenCL platform. If you change the REG_DWORD value for a platform from 0 to 1 then that platform will no longer enumerate.

The nice thing about this method is that if you change your mind or it causes you problems, you can re-enable the platform by simply changing the value from 1 back to 0.

My Strix Radeon R9 380 is now working perfectly again on Moo!

PS. I was also able to update my drivers back to the latest as I'd down graded them in search of a solution.

So simply 'switching off' the Intel OpenCL drivers in the registry worked!!

Thanks for your help!!
10) Message boards : Number crunching : amd 480 and opencl issues (Message 7705)
Posted 27 Jul 2017 by Mercosity
Post:
Hi there, thanks for coming back to me.

Done all the driver removals and re-installs already but no joy.

Below is a copy of my GPU info from BOINC data, maybe you can see something problematic:

-<ati_opencl>

<name>AMD Radeon (TM) R9 380 Series</name>

<vendor>Advanced Micro Devices, Inc.</vendor>

<vendor_id>4098</vendor_id>

<available>1</available>

<half_fp_config>0</half_fp_config>

<single_fp_config>190</single_fp_config>

<double_fp_config>63</double_fp_config>

<endian_little>1</endian_little>

<execution_capabilities>1</execution_capabilities>

<extensions>cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16 cl_khr_gl_sharing cl_khr_gl_depth_images cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_khr_image2d_from_buffer cl_khr_spir cl_khr_subgroups cl_khr_gl_event cl_khr_depth_images cl_khr_mipmap_image cl_khr_mipmap_image_writes cl_amd_liquid_flash </extensions>

<global_mem_size>4294967296</global_mem_size>

<local_mem_size>32768</local_mem_size>

<max_clock_frequency>990</max_clock_frequency>

<max_compute_units>28</max_compute_units>

<nv_compute_capability_major>0</nv_compute_capability_major>

<nv_compute_capability_minor>0</nv_compute_capability_minor>

<amd_simd_per_compute_unit>4</amd_simd_per_compute_unit>

<amd_simd_width>16</amd_simd_width>

<amd_simd_instruction_width>1</amd_simd_instruction_width>

<opencl_platform_version>OpenCL 2.0 AMD-APP (2348.4)</opencl_platform_version>

<opencl_device_version>OpenCL 2.0 AMD-APP (2348.4)</opencl_device_version>

<opencl_driver_version>2348.4</opencl_driver_version>

<device_num>0</device_num>

<peak_flops>3548160000000.000000</peak_flops>

<opencl_available_ram>4294967296.000000</opencl_available_ram>

<opencl_device_index>0</opencl_device_index>

<warn_bad_cuda>0</warn_bad_cuda>

</ati_opencl>

Really would like to get this sorted out and get back to working on my favorite project!!
11) Message boards : Number crunching : amd 480 and opencl issues (Message 7702)
Posted 20 Jul 2017 by Mercosity
Post:
I looked at your error report and it's the same as mine.

Yours:
00:31:27 (2532): device: OpenCL: AMD/ATI GPU 0: Radeon (TM) RX 480 Graphics (driver version 2348.3, device version OpenCL 2.0 AMD-APP (2348.3), 4096MB, 4096MB available, 6018

Mine:
22:35:31 (3036): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.3, device version OpenCL 2.0 AMD-APP (2348.3), 4096MB, 4096MB available, 3548

Only difference I see is :

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1). on mine.

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.2). on yours.

I'm running Windows Server 2008 R2 (same as Windows 7). GPU is working on everything else but Moo. Was working fine on Moo until just over a week ago.

I'm running 17.4.4 as it was suggested as a fix.

You say you removed the Intel cpu OpenCL drivers and this made it work?

I'm gonna try the latest drivers again in a seemingly futile attempt to get this working again. I'm goin' nuts!!
12) Message boards : Number crunching : amd 480 and opencl issues (Message 7700)
Posted 19 Jul 2017 by Mercosity
Post:
Very strange!

I have a similar problem with my R9 380 which was working absolutely fine until about a week ago. I'm getting the same error.

<core_client_version>7.6.33</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code 195 (0xc3)
</message>
<stderr_txt>

22:35:31 (3036): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
22:35:31 (3036): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.3, device version OpenCL 2.0 AMD-APP (2348.3), 4096MB, 4096MB available, 3548 GFLOPS peak)
22:35:31 (3036): checkpoint interval: 0h15m00s00 (task 1075200 GFLOPS, 0h05m03s03 per packet)
22:35:31 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:32 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:32 UTC] *Break* Shutting down...
22:35:32 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:32 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:32 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:32 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 2/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:33 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:33 UTC] *Break* Shutting down...
22:35:33 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:33 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:33 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:33 (3036): no progress detected during last retry
22:35:33 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 3/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:34 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:34 UTC] *Break* Shutting down...
22:35:34 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:34 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:34 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:34 (3036): no progress detected during last retry
22:35:34 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 4/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:35 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:35 UTC] *Break* Shutting down...
22:35:35 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:35 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:35 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:35 (3036): no progress detected during last retry
22:35:35 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 5/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:36 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:36 UTC] *Break* Shutting down...
22:35:36 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:36 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:36 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:36 (3036): no progress detected during last retry
22:35:36 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 6/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:37 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:37 UTC] *Break* Shutting down...
22:35:37 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:37 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:37 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:37 (3036): no progress detected during last retry
22:35:37 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 7/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:38 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:38 UTC] *Break* Shutting down...
22:35:38 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:38 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:38 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:38 (3036): no progress detected during last retry
22:35:38 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 8/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:39 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:39 UTC] *Break* Shutting down...
22:35:39 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:39 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:39 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:39 (3036): no progress detected during last retry
22:35:39 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 9/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:40 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:40 UTC] *Break* Shutting down...
22:35:40 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:40 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:40 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:40 (3036): no progress detected during last retry
22:35:40 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 10/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:41 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:41 UTC] *Break* Shutting down...
22:35:41 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:41 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:41 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:41 (3036): no progress detected during last retry
22:35:41 (3036): too many retries (max 10), cancelling
22:35:41 (3036): called boinc_finish(195)

</stderr_txt>

Anyone recognize this problem?

I really need some advice.
13) Questions and Answers : Windows : AMD R9 380 - Computation Errors - Distributed.net1.04 (opencl_ati_101) on dnetc_r72_1499529280_13_823_0 (Message 7699)
Posted 17 Jul 2017 by Mercosity
Post:
Can anyone offer me advice?
14) Questions and Answers : Windows : AMD R9 380 - Computation Errors - Distributed.net1.04 (opencl_ati_101) on dnetc_r72_1499529280_13_823_0 (Message 7698)
Posted 13 Jul 2017 by Mercosity
Post:
Still have this problem and haven't found a solution. Help please!
15) Questions and Answers : Windows : AMD R9 380 - Computation Errors - Distributed.net1.04 (opencl_ati_101) on dnetc_r72_1499529280_13_823_0 (Message 7695)
Posted 12 Jul 2017 by Mercosity
Post:
Updated driver in case this was the problem but still getting computation errors.

<core_client_version>7.6.33</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code 195 (0xc3)
</message>
<stderr_txt>

22:35:31 (3036): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
22:35:31 (3036): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.3, device version OpenCL 2.0 AMD-APP (2348.3), 4096MB, 4096MB available, 3548 GFLOPS peak)
22:35:31 (3036): checkpoint interval: 0h15m00s00 (task 1075200 GFLOPS, 0h05m03s03 per packet)
22:35:31 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:32 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:32 UTC] *Break* Shutting down...
22:35:32 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:32 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:32 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:32 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 2/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:33 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:33 UTC] *Break* Shutting down...
22:35:33 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:33 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:33 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:33 (3036): no progress detected during last retry
22:35:33 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 3/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:34 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:34 UTC] *Break* Shutting down...
22:35:34 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:34 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:34 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:34 (3036): no progress detected during last retry
22:35:34 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 4/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:35 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:35 UTC] *Break* Shutting down...
22:35:35 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:35 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:35 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:35 (3036): no progress detected during last retry
22:35:35 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 5/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:36 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:36 UTC] *Break* Shutting down...
22:35:36 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:36 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:36 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:36 (3036): no progress detected during last retry
22:35:36 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 6/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:37 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:37 UTC] *Break* Shutting down...
22:35:37 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:37 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:37 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:37 (3036): no progress detected during last retry
22:35:37 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 7/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:38 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:38 UTC] *Break* Shutting down...
22:35:38 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000
22:35:38 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:38 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:38 (3036): no progress detected during last retry
22:35:38 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 8/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:39 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:39 UTC] *Break* Shutting down...
22:35:39 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:39 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:39 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:39 (3036): no progress detected during last retry
22:35:39 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 9/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:40 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:40 UTC] *Break* Shutting down...
22:35:40 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:40 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:40 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:40 (3036): no progress detected during last retry
22:35:40 (3036): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 10/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 11 21:35:41 UTC] Unable to initialize OpenCL.
[Jul 11 21:35:41 UTC] *Break* Shutting down...
22:35:41 (3036): dnetc520-win32-x86-opencl.exe exited; CPU time 0.015600
22:35:41 (3036): input buffer 12 packets (2144 bytes), checkpoint file 0 packets (0 bytes), output buffer 0 packets (0 bytes)
22:35:41 (3036): premature exit detected, app exit status: 0xfffffffd
22:35:41 (3036): no progress detected during last retry
22:35:41 (3036): too many retries (max 10), cancelling
22:35:41 (3036): called boinc_finish(195)

</stderr_txt>
]]>
16) Questions and Answers : Windows : AMD R9 380 - Computation Errors - Distributed.net1.04 (opencl_ati_101) on dnetc_r72_1499529280_13_823_0 (Message 7694)
Posted 11 Jul 2017 by Mercosity
Post:
Yeah, the driver version does look strange as listed on the wu.

However the driver version I'm using on Windows 7 is 15.200.1046.0 (Crimson 17.6.2)as shown on GPU-Z.
17) Questions and Answers : Windows : AMD R9 380 - Computation Errors - Distributed.net1.04 (opencl_ati_101) on dnetc_r72_1499529280_13_823_0 (Message 7688)
Posted 8 Jul 2017 by Mercosity
Post:
I'm getting continual Computation errors on work units.

<core_client_version>7.6.33</core_client_version>
<![CDATA[
<stderr_txt>

22:51:41 (1128): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
22:51:41 (1128): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.4, device version OpenCL 2.0 AMD-APP (2348.4), 4096MB, 4096MB available, 3548 GFLOPS peak)
22:51:41 (1128): checkpoint interval: 0h15m00s00 (task 1152200 GFLOPS, 0h05m24s73 per packet)
22:51:41 (1128): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 06 21:51:48 UTC] Automatic processor type detection did not
recognize the processor (tag: "Tonga (AMD Radeon (TM) R9 380 Series)")
[Jul 06 21:52:06 UTC] RC5-72: using core #1 (CL 1-pipe).
[Jul 06 21:52:06 UTC] RC5-72: Switched to random subspace 1341 (stored)
[Jul 06 21:52:06 UTC] RC5-72: Loaded D6:A4B65F49:00000000:64*2^32
[Jul 06 21:52:06 UTC] RC5-72: 12 packets (759.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:12:39.00
[Jul 06 21:52:06 UTC] RC5-72: 0 packets are in out.r72
[Jul 06 21:52:06 UTC] 1 cruncher has been started.
[Jul 06 21:54:05 UTC] RC5-72: Completed D6:A4B65F49:00000000 (64.00 stats units)
0.00:01:58.03 - [2,328,861,968 keys/s]
[Jul 06 21:54:05 UTC] RC5-72: Loaded D6:A4B65F89:00000000:64*2^32
[Jul 06 21:54:05 UTC] RC5-72: Summary: 1 packet (64.00 stats units)
0.00:01:58.03 - [2,328.86 Mkeys/s]
[Jul 06 21:54:05 UTC] RC5-72: 11 packets (695.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:11:35.00
[Jul 06 21:54:05 UTC] RC5-72: 1 packet (64.00 stats units) is in out.r72
[Jul 06 21:56:05 UTC] RC5-72: Completed D6:A4B65F89:00000000 (64.00 stats units)
0.00:01:59.04 - [2,309,044,613 keys/s]
[Jul 06 21:56:05 UTC] RC5-72: Loaded D6:A4B65FC9:00000000:55*2^32
[Jul 06 21:56:05 UTC] RC5-72: Summary: 2 packets (128.00 stats units)
0.00:03:57.07 - [2,318.91 Mkeys/s]
[Jul 06 21:56:05 UTC] RC5-72: 10 packets (640.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:10:40.00
[Jul 06 21:56:05 UTC] RC5-72: 2 packets (128.00 stats units) are in out.r72
[Jul 06 21:57:46 UTC] RC5-72: Completed D6:A4B65FC9:00000000 (55.00 stats units)
0.00:01:40.26 - [2,356,059,138 keys/s]
[Jul 06 21:57:46 UTC] RC5-72: Loaded D6:A4B66E80:00000000:64*2^32
[Jul 06 21:57:46 UTC] RC5-72: Summary: 3 packets (183.00 stats units)
0.00:05:37.33 - [2,329.95 Mkeys/s]
[Jul 06 21:57:46 UTC] RC5-72: 9 packets (576.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:09:36.00
[Jul 06 21:57:46 UTC] RC5-72: 3 packets (183.00 stats units) are in out.r72
[Jul 06 21:59:42 UTC] RC5-72: Completed D6:A4B66E80:00000000 (64.00 stats units)
0.00:01:55.34 - [2,383,052,068 keys/s]
[Jul 06 21:59:42 UTC] RC5-72: Loaded D6:A4B66EC0:00000000:64*2^32
[Jul 06 21:59:42 UTC] RC5-72: Summary: 4 packets (247.00 stats units)
0.00:07:32.68 - [2,343.48 Mkeys/s]
[Jul 06 21:59:42 UTC] RC5-72: 8 packets (512.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:08:32.00
[Jul 06 21:59:42 UTC] RC5-72: 4 packets (247.00 stats units) are in out.r72

23:17:06 (5072): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
23:17:06 (5072): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.4, device version OpenCL 2.0 AMD-APP (2348.4), 4096MB, 4096MB available, 3548 GFLOPS peak)
23:17:06 (5072): checkpoint interval: 0h15m00s00 (task 1152200 GFLOPS, 0h05m24s73 per packet)
23:17:06 (5072): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 06 22:17:14 UTC] Recovered 1 checkpoint packet

23:41:41 (4364): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
23:41:41 (4364): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.4, device version OpenCL 2.0 AMD-APP (2348.4), 4096MB, 4096MB available, 3548 GFLOPS peak)
23:41:41 (4364): checkpoint interval: 0h15m00s00 (task 1152200 GFLOPS, 0h05m24s73 per packet)
23:41:41 (4364): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10
23:41:46 (4364): dnetc520-win32-x86-opencl.exe exited; CPU time 0.000000

23:52:10 (1928): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
23:52:10 (1928): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.4, device version OpenCL 2.0 AMD-APP (2348.4), 4096MB, 4096MB available, 1075 GFLOPS peak)
23:52:10 (1928): checkpoint interval: 0h20m00s00 (task 1152200 GFLOPS, 0h17m51s61 per packet)
23:52:10 (1928): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 06 22:52:11 UTC] Open failed for 'C:\ProgramData\BOINC\slots\6\chkpoint'
File is not in distributed.net client format.
[Jul 06 22:52:14 UTC] Automatic processor type detection did not
recognize the processor (tag: "Tonga (AMD Radeon (TM) R9 380 Series)")
[Jul 06 22:52:33 UTC] RC5-72: using core #2 (CL 2-pipe).
[Jul 06 22:52:33 UTC] RC5-72: Loaded D6:A4B67240:00000000:64*2^32
[Jul 06 22:52:33 UTC] RC5-72: 7 packets (448.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:37:20.00
[Jul 06 22:52:33 UTC] RC5-72: 4 packets (247.00 stats units) are in out.r72
[Jul 06 22:52:33 UTC] 1 cruncher has been started.

23:59:29 (1000): wrapper v1.4 build 16 for AMD/ATI OpenCL starting (BOINC Wrapper v7.5.26011)
23:59:29 (1000): device: OpenCL: AMD/ATI GPU 0: AMD Radeon (TM) R9 380 Series (driver version 2348.4, device version OpenCL 2.0 AMD-APP (2348.4), 4096MB, 4096MB available, 3548 GFLOPS peak)
23:59:29 (1000): checkpoint interval: 0h15m00s00 (task 1152200 GFLOPS, 0h05m24s73 per packet)
23:59:29 (1000): wrapper: running dnetc520-win32-x86-opencl.exe (-ini dnetc.ini -runoffline -multiok=1) - attempt 1/10

dnetc v2.9111-520-CTR-12082118 for OpenCL on Win32 (WindowsNT 6.1).
Using email address (distributed.net ID) '<censored> '

[Jul 06 22:59:36 UTC] Recovered 1 checkpoint packet
[Jul 06 22:59:38 UTC] Automatic processor type detection did not
recognize the processor (tag: "Tonga (AMD Radeon (TM) R9 380 Series)")
[Jul 06 22:59:55 UTC] RC5-72: using core #1 (CL 1-pipe).
[Jul 06 22:59:55 UTC] RC5-72: Loaded D6:A4B67240:00000000:64*2^32
[Jul 06 22:59:55 UTC] RC5-72: 7 packets (448.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:07:28.00
[Jul 06 22:59:55 UTC] RC5-72: 4 packets (247.00 stats units) are in out.r72
[Jul 06 22:59:55 UTC] 1 cruncher has been started.
[Jul 06 23:01:43 UTC] RC5-72: Completed D6:A4B67240:00000000 (64.00 stats units)
0.00:01:47.43 - [2,558,503,187 keys/s]
[Jul 06 23:01:43 UTC] RC5-72: Loaded D6:A4B67280:00000000:64*2^32
[Jul 06 23:01:43 UTC] RC5-72: Summary: 1 packet (64.00 stats units)
0.00:01:47.43 - [2,558.50 Mkeys/s]
[Jul 06 23:01:43 UTC] RC5-72: 6 packets (384.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:06:24.00
[Jul 06 23:01:43 UTC] RC5-72: 5 packets (311.00 stats units) are in out.r72
[Jul 06 23:03:34 UTC] RC5-72: Completed D6:A4B67280:00000000 (64.00 stats units)
0.00:01:50.94 - [2,477,538,188 keys/s]
[Jul 06 23:03:34 UTC] RC5-72: Loaded D6:A4B672C0:00000000:64*2^32
[Jul 06 23:03:34 UTC] RC5-72: Summary: 2 packets (128.00 stats units)
0.00:03:38.38 - [2,517.37 Mkeys/s]
[Jul 06 23:03:34 UTC] RC5-72: 5 packets (320.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:05:20.00
[Jul 06 23:03:34 UTC] RC5-72: 6 packets (375.00 stats units) are in out.r72
[Jul 06 23:05:20 UTC] RC5-72: Completed D6:A4B672C0:00000000 (64.00 stats units)
0.00:01:45.09 - [2,615,443,747 keys/s]
[Jul 06 23:05:20 UTC] RC5-72: Loaded D6:A4B67640:00000000:64*2^32
[Jul 06 23:05:20 UTC] RC5-72: Summary: 3 packets (192.00 stats units)
0.00:05:23.48 - [2,549.23 Mkeys/s]
[Jul 06 23:05:20 UTC] RC5-72: 4 packets (256.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:04:16.00
[Jul 06 23:05:20 UTC] RC5-72: 7 packets (439.00 stats units) are in out.r72
[Jul 06 23:07:08 UTC] RC5-72: Completed D6:A4B67640:00000000 (64.00 stats units)
0.00:01:47.90 - [2,547,382,971 keys/s]
[Jul 06 23:07:08 UTC] RC5-72: Loaded D6:A4B67680:00000000:64*2^32
[Jul 06 23:07:08 UTC] RC5-72: Summary: 4 packets (256.00 stats units)
0.00:07:11.38 - [2,548.77 Mkeys/s]
[Jul 06 23:07:08 UTC] RC5-72: 3 packets (192.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:03:12.00
[Jul 06 23:07:08 UTC] RC5-72: 8 packets (503.00 stats units) are in out.r72
[Jul 06 23:09:26 UTC] RC5-72: Completed D6:A4B67680:00000000 (64.00 stats units)
0.00:02:16.86 - [2,008,460,521 keys/s]
[Jul 06 23:09:26 UTC] RC5-72: Loaded D6:A4B676C0:00000000:64*2^32
[Jul 06 23:09:26 UTC] RC5-72: Summary: 5 packets (320.00 stats units)
0.00:09:28.24 - [2,418.64 Mkeys/s]
[Jul 06 23:09:26 UTC] RC5-72: 2 packets (128.00 stats units) remain in
in.r72
Projected ideal time to completion: 0.00:02:08.00
[Jul 06 23:09:26 UTC] RC5-72: 9 packets (567.00 stats units) are in out.r72
[Jul 06 23:11:50 UTC] RC5-72: Completed D6:A4B676C0:00000000 (64.00 stats units)
0.00:02:23.64 - [1,913,578,567 keys/s]
[Jul 06 23:11:50 UTC] RC5-72: Loaded D6:A7EE9000:00000000:64*2^32
[Jul 06 23:11:50 UTC] RC5-72: Summary: 6 packets (384.00 stats units)
0.00:11:51.89 - [2,316.73 Mkeys/s]
[Jul 06 23:11:50 UTC] RC5-72: 1 packet (64.00 stats units) remains in in.r72
Projected ideal time to completion: 0.00:01:04.00
[Jul 06 23:11:50 UTC] RC5-72: 10 packets (631.00 stats units) are in out.r72
[Jul 06 23:16:40 UTC] RC5-72: Completed D6:A7EE9000:00000000 (64.00 stats units)
0.00:04:49.14 - [950,647,789 keys/s]
[Jul 06 23:16:40 UTC] RC5-72: Loaded D6:A7EE9040:00000000:64*2^32
[Jul 06 23:16:40 UTC] RC5-72: Summary: 7 packets (448.00 stats units)
0.00:16:41.04 - [1,922.14 Mkeys/s]
[Jul 06 23:16:40 UTC] RC5-72: 0 packets remain in in.r72
[Jul 06 23:16:40 UTC] RC5-72: 11 packets (695.00 stats units) are in out.r72
[Jul 06 23:21:56 UTC] RC5-72: Completed D6:A7EE9040:00000000 (64.00 stats units)
0.00:05:15.77 - [870,478,332 keys/s]
[Jul 06 23:21:56 UTC] Shutdown - packet limit exceeded.
[Jul 06 23:21:56 UTC] RC5-72: Summary: 8 packets (512.00 stats units)
0.00:21:56.82 - [1,669.95 Mkeys/s]
[Jul 06 23:21:56 UTC] RC5-72: 0 packets remain in in.r72
[Jul 06 23:21:56 UTC] RC5-72: 12 packets (759.00 stats units) are in out.r72
[Jul 06 23:21:56 UTC] *Break* Shutting down...
[Jul 06 23:21:57 UTC] Shutdown complete.
00:21:58 (1000): dnetc520-win32-x86-opencl.exe exited; CPU time 57.236767
00:21:58 (1000): called boinc_finish(0)

</stderr_txt>
]]>

This is on an AMD R9 380 which is not overclocked at all and has previously never had a problem with work units.

Cannot understand what's happening?

Any one else having this problem?

If you are, did you find a solution?
18) Message boards : Number crunching : Moo! Wrapper Offline. (Message 7637)
Posted 3 May 2017 by Mercosity
Post:
So the site and servers have been offline for quite a time.

I do understand that server maintenance is a necessity and we all need to maintain our equipment from time to time.

Perhaps the administrators could see it from the users side and advise us what is happening.

A short notice would be appropriate on the forum and if there is a sudden 'breakdown' and the site goes down as well, perhaps a notice on the main BOINC forum or BOINC Stats forum would be a good idea.

Thanks, Mercosity ..
19) Message boards : Number crunching : Week-long challenge (Message 7520)
Posted 4 Dec 2016 by Mercosity
Post:
Hello,

there will be a week-long challenge (A).

I: WU availability:

Can the Collatz admin please check if there's enough WUs available for the challenge time ?
(Or mods: can you contact the admins with this or move my post to an appropriate section? Merci)


II. BOINC users: please participate
- 1. tell your teamfounder to join the challenge on boincstats
- 2. the users just have to crunch the WUs in that time period. nothing more


Mercosity

(A) http://boincstats.com/en/stats/challenge/team/chat/835
20) Message boards : Cafe : Last person to post XXIII (Message 7514)
Posted 30 Nov 2016 by Mercosity
Post:
Huh... I won..





 
Copyright © 2011-2019 Moo! Wrapper Project