7970s Dont Run

\n studio-striking\n

Message boards : Number crunching : 7970s Dont Run
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 3 · 4 · 5 · 6

AuthorMessage
Profile Beyond
Avatar

Send message
Joined: 18 May 11
Posts: 46
Credit: 1,254,302,893
RAC: 0
Message 5378 - Posted: 27 Aug 2013, 10:30:14 UTC - in response to Message 5210.  

I have now successful run it on HD7950 with 13.4 driver but against 5xxx/6xxx serie poor speed. It must have 30%-40% more speed increase. The client still needs some optimizations with 7xxx serie.

Get now working stream client.

Download

Download and copy files into project folder.

Thx for the infos below. Good luck!

Thanks for the link and info, got it running on 2 7770 cards. Wonder why Teemu isn't sending this app out automatically...
ID: 5378 · Rating: 0 · rate: Rate + / Rate - Report as offensive
rebirther
Avatar

Send message
Joined: 2 May 11
Posts: 10
Credit: 4,408,435
RAC: 0
Message 5381 - Posted: 27 Aug 2013, 19:26:08 UTC - in response to Message 5378.  

I have now successful run it on HD7950 with 13.4 driver but against 5xxx/6xxx serie poor speed. It must have 30%-40% more speed increase. The client still needs some optimizations with 7xxx serie.

Get now working stream client.

Download

Download and copy files into project folder.

Thx for the infos below. Good luck!

Thanks for the link and info, got it running on 2 7770 cards. Wonder why Teemu isn't sending this app out automatically...


There is a mispell. I dont know how to get the stream client running. Must be faster than the current one. The client must be optimized very soon because HD9xxx coming soon.
ID: 5381 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Beyond
Avatar

Send message
Joined: 18 May 11
Posts: 46
Credit: 1,254,302,893
RAC: 0
Message 5383 - Posted: 28 Aug 2013, 10:48:01 UTC - in response to Message 5381.  
Last modified: 28 Aug 2013, 10:49:16 UTC

While two 7770 cards are working, I can't seem to get a 7850 to work. It just sits in low power (300MHz) mode and goes very slowly. Tried setting up 2d and 3d profiles in Afterburner to force it to run at speed but no go. Works fine on all other projects though.
ID: 5383 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Beyond
Avatar

Send message
Joined: 18 May 11
Posts: 46
Credit: 1,254,302,893
RAC: 0
Message 5446 - Posted: 19 Sep 2013, 21:00:02 UTC - in response to Message 5383.  

While two 7770 cards are working, I can't seem to get a 7850 to work. It just sits in low power (300MHz) mode and goes very slowly. Tried setting up 2d and 3d profiles in Afterburner to force it to run at speed but no go. Works fine on all other projects though.

Now Iv'e gotten 2 out of 3 7790 GPUs running. The 3rd one refuses to run Moo but runs everything else perfectly. Completion time for the 7790 is about 70% of the 7770. Still no luck on the 7850 cards.
ID: 5446 · Rating: 0 · rate: Rate + / Rate - Report as offensive
rebirther
Avatar

Send message
Joined: 2 May 11
Posts: 10
Credit: 4,408,435
RAC: 0
Message 5461 - Posted: 24 Sep 2013, 16:31:17 UTC - in response to Message 5446.  
Last modified: 24 Sep 2013, 16:31:43 UTC

While two 7770 cards are working, I can't seem to get a 7850 to work. It just sits in low power (300MHz) mode and goes very slowly. Tried setting up 2d and 3d profiles in Afterburner to force it to run at speed but no go. Works fine on all other projects though.

Now Iv'e gotten 2 out of 3 7790 GPUs running. The 3rd one refuses to run Moo but runs everything else perfectly. Completion time for the 7790 is about 70% of the 7770. Still no luck on the 7850 cards.


Have you tried BOINC Client 7.2.16? Iam running with Catalyst 13.9 too but only one card. Dont know if this helps.
ID: 5461 · Rating: 0 · rate: Rate + / Rate - Report as offensive
BladeD
Avatar

Send message
Joined: 26 Dec 11
Posts: 178
Credit: 151,050,168
RAC: 0
Message 5480 - Posted: 27 Sep 2013, 22:01:39 UTC
Last modified: 27 Sep 2013, 22:07:38 UTC

Does anyone converted that app_info.xml into a cc_config.xml file?
ID: 5480 · Rating: 0 · rate: Rate + / Rate - Report as offensive
rebirther
Avatar

Send message
Joined: 2 May 11
Posts: 10
Credit: 4,408,435
RAC: 0
Message 5482 - Posted: 28 Sep 2013, 16:30:32 UTC - in response to Message 5480.  

Does anyone converted that app_info.xml into a cc_config.xml file?


Why? The files are different.
ID: 5482 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Tex1954

Send message
Joined: 25 Jul 11
Posts: 5
Credit: 23,397,372
RAC: 0
Message 5521 - Posted: 10 Oct 2013, 20:47:32 UTC - in response to Message 5461.  

Have you tried BOINC Client 7.2.16? Iam running with Catalyst 13.9 too but only one card. Dont know if this helps.


I have tried drivers from 12.10 up to (now) 13.9 and nothing works. All the WU compute error after 26 seconds or so. The GPU never gets turned on...

System is an AMD 1100T or now a 1045T (testing) and HD 7970...

8-)

ID: 5521 · Rating: 0 · rate: Rate + / Rate - Report as offensive
rebirther
Avatar

Send message
Joined: 2 May 11
Posts: 10
Credit: 4,408,435
RAC: 0
Message 5525 - Posted: 11 Oct 2013, 15:16:30 UTC - in response to Message 5521.  

Have you tried BOINC Client 7.2.16? Iam running with Catalyst 13.9 too but only one card. Dont know if this helps.


I have tried drivers from 12.10 up to (now) 13.9 and nothing works. All the WU compute error after 26 seconds or so. The GPU never gets turned on...

System is an AMD 1100T or now a 1045T (testing) and HD 7970...

8-)



You need the app_info file. The official installed client doesnt work.
ID: 5525 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Beyond
Avatar

Send message
Joined: 18 May 11
Posts: 46
Credit: 1,254,302,893
RAC: 0
Message 5534 - Posted: 15 Oct 2013, 18:37:46 UTC - in response to Message 5461.  

While two 7770 cards are working, I can't seem to get a 7850 to work. It just sits in low power (300MHz) mode and goes very slowly. Tried setting up 2d and 3d profiles in Afterburner to force it to run at speed but no go. Works fine on all other projects though.

Now Iv'e gotten 2 out of 3 7790 GPUs running. The 3rd one refuses to run Moo but runs everything else perfectly. Completion time for the 7790 is about 70% of the 7770. Still no luck on the 7850 cards.

Have you tried BOINC Client 7.2.16? Iam running with Catalyst 13.9 too but only one card. Dont know if this helps.

Thanks for the post. Just installed BOINC 7.2.23 and the Catalyst 13.9 drivers on that box and Moo still goes to 4% and stalls. Swapped a 7950 in and same thing, but the 7790 swapped into the other box now works on Moo. So it must be something in the software installs, but they should be the same. Also same MB and CPU, pretty much same hardware all around. All BOINC only boxes running the same projects. Moo is the only project that stalls. Any other ideas anyone?
ID: 5534 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5794 - Posted: 31 Dec 2013, 14:49:08 UTC
Last modified: 31 Dec 2013, 14:49:31 UTC

I tried the 13.12 Drivers & 7.2.33 Client on a 7970 with no success, Wu's run about 28 Seconds then error out so I'm missing something I assume ...
ID: 5794 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Tom

Send message
Joined: 11 Jun 11
Posts: 7
Credit: 54,390,595
RAC: 4,079
Message 5795 - Posted: 31 Dec 2013, 15:13:36 UTC

Have you download
http://www.bc-team.org/downloads.php?view=detail&df_id=80
the Files?

Install them and then is hopply works.
Not good, bad you became Wu's.

Is the Radeon 7700 Problem.

Tom
ID: 5795 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5796 - Posted: 31 Dec 2013, 17:21:53 UTC

I downloaded them but haven't had a chance to try them out yet ... Will let you know if they work or not but may be tomorrow before I try them ...
ID: 5796 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5798 - Posted: 31 Dec 2013, 19:42:16 UTC

Well the Files seems to let me run the Moo ATI GPU WU's on my 7970, that is until the system crash's because the GPU is running at over 100 degree's even with the fan running at 100%, so I still can't run them on the 7970. Maybe it's just that card, will try on another 7970 later tonight or tomorrow, taking the wife to a movie right now so don't have time to mess with it anymore now ...
ID: 5798 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,407,912
RAC: 3,236
Message 5801 - Posted: 1 Jan 2014, 11:35:00 UTC - in response to Message 5798.  

Well the Files seems to let me run the Moo ATI GPU WU's on my 7970, that is until the system crash's because the GPU is running at over 100 degree's even with the fan running at 100%, so I still can't run them on the 7970. Maybe it's just that card, will try on another 7970 later tonight or tomorrow, taking the wife to a movie right now so don't have time to mess with it anymore now ...


Try this thread, it worked when the person in there did what it said:
http://moowrap.net/forum_thread.php?id=342
ID: 5801 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5803 - Posted: 1 Jan 2014, 12:19:52 UTC
Last modified: 1 Jan 2014, 12:53:31 UTC

I don't see anything in that Thread to help with the Heat Problem, I can run the GPU Wu's on my 7970 but the card gets so hot the whole system crashes once the Temps get over 100 degrees, having the fan on 100& doesn't keep it from getting to hot either ...

EDIT: I went out & dropped the Memory Voltage as low as it will go, the Core Voltage to 1000 & the Fan set on 80% & the GPU @ stock 925 setting.

I'm also only running 7 of the 8 Threads in HT Mode on the i7 3770K running at stock speed, so far the Card seems to be staying at about 65* with those settings with a run time of about 19 Min's ...
ID: 5803 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,407,912
RAC: 3,236
Message 5806 - Posted: 2 Jan 2014, 11:55:56 UTC - in response to Message 5803.  

I don't see anything in that Thread to help with the Heat Problem, I can run the GPU Wu's on my 7970 but the card gets so hot the whole system crashes once the Temps get over 100 degrees, having the fan on 100& doesn't keep it from getting to hot either ...

EDIT: I went out & dropped the Memory Voltage as low as it will go, the Core Voltage to 1000 & the Fan set on 80% & the GPU @ stock 925 setting.

I'm also only running 7 of the 8 Threads in HT Mode on the i7 3770K running at stock speed, so far the Card seems to be staying at about 65* with those settings with a run time of about 19 Min's ...


Well I am toast then, with resources like yours my numbers will soon be a distant point in your rear view mirror!! I say go for it whole hog and pass me like the wind!!
ID: 5806 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5807 - Posted: 2 Jan 2014, 13:23:48 UTC

No, all I want is 250 Million, I've pretty much stopped running the GPU's, way to expensive for me to have to keep paying for running them out of my own pocket with no real return for my efforts. If I had a Business/Company or Collage computers to run like some where I can deduct some of the cost then I'd keep running them but I don't so my GPU Computing will be at a minimum like it has been & will be in the Future.
ID: 5807 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,407,912
RAC: 3,236
Message 5808 - Posted: 2 Jan 2014, 13:52:30 UTC - in response to Message 5807.  

No, all I want is 250 Million, I've pretty much stopped running the GPU's, way to expensive for me to have to keep paying for running them out of my own pocket with no real return for my efforts. If I had a Business/Company or Collage computers to run like some where I can deduct some of the cost then I'd keep running them but I don't so my GPU Computing will be at a minimum like it has been & will be in the Future.


Ahhh I see...I have the same problem and have been thinking of 'mining' for bitcoins again. I did that a while back and since they were only worth about 10 bucks it cost me much more to make then what they were worth, a week or so ago they were up to 700 bucks apiece. Right now I am still crunching with them though and actually got 2 new 7970's for Christmas. I am stopping at 1 billion credits for each project, then moving on to another one, in fact I am close to finishing my 2nd one.
ID: 5808 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 5838 - Posted: 16 Jan 2014, 22:40:42 UTC

Has something changed with the Wu's ??? My 7970's were running the Wu's fine until a day or two ago but now they started taking forever to run the Wu's because they keep down clocking for what ever reason ???
ID: 5838 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Previous · 1 . . . 3 · 4 · 5 · 6

Message boards : Number crunching : 7970s Dont Run


 
Copyright © 2011-2024 Moo! Wrapper Project