i guess moo dosent like the 7xxx version of boinc.not getting any work again.i was running 6.12.34 ,belive thats the current app version,but running it the gpu goes haywire.the activity floats from nothing to 100%,and back to nothing or anywhere in between.7xx version,gpu smooths out,nice and stable,but moo stops sending work.all my other projects keep work coming steadyguess ill have to wait and see how many days i have to wait to get work again

i guess moo dosent like the 7xxx version of boinc.not getting any work again.i was running 6.12.34 ,belive thats the current app version,but running it the gpu goes haywire.the activity floats from nothing to 100%,and back to nothing or anywhere in between.7xx version,gpu smooths out,nice and stable,but moo stops sending work.all my other projects keep work coming steadyguess ill have to wait and see how many days i have to wait to get work again

Okay John I just switched a couple of machines over to version 7 and got TONS of work for Moo, and returned them just fine. Do you have Boinc set to crunch 100% of the time or are you throttling it a bit? If for instance you are throttling it you would see what you are seeing, 100% usage for a bit then no usage then 100% usage again. If you set Boinc to run at 70% it would run 100% for 7 clock ticks and then take the next 3 clock ticks off, then 100% for 7 ticks etc, etc. It does NOT just sort of only go up to 70% and hold it there! It is an average, remember pc's are either on or off, no in betweens, they are either doing something or they are not.

well think i found a happy medium,boinc came out with 7.0.25,and switched the gpu back to 12.1.gpu has settled down,and work is coming normally on all projects.guess it was just a matter of getting the right combo.

well think i found a happy medium,boinc came out with 7.0.25,and switched the gpu back to 12.1.gpu has settled down,and work is coming normally on all projects.guess it was just a matter of getting the right combo.

Yes it is and now that you have it don't upgrade until you HAVE TOO!!! Most of my pc's are still on ver 11.9 of the AMD software as it just works for me.

Haven't been getting any work over the last three or so days. Is Moo! tied with Catalyst drivers? Because I'm only running MSI Afterburner with 11.5 drivers in it.

---

Haven't been getting any work over the last three or so days. Is Moo! tied with Catalyst drivers? Because I'm only running MSI Afterburner with 11.5 drivers in it.

No it is the fact that you upgraded your version of Boinc to a bad one they released without checking enough. There is a newer version out now, upgrade ONE pc to it and see if it helps or not. The newer version is 7.0.27 and is STILL a TEST version, but if it fixes your problems it is better than what you have. Just give it a few days to do a good test.