Faulty WUs

\n studio-striking\n

Message boards : Number crunching : Faulty WUs
Message board moderation

To post messages, you must log in.

Previous · 1 · 2 · 3 · 4

AuthorMessage
scottishwebcamslive.com
Avatar

Send message
Joined: 2 May 11
Posts: 21
Credit: 173,527,396
RAC: 0
Message 1844 - Posted: 21 Dec 2011, 11:42:19 UTC

Hi,

Thought I'd better put some extra info on the settings of the 5970 as its not at default
I have upped the voltage to 1.1 volts to be stable for my 860 meg core clock speed ( can run 900 but with very little performance gain and extra thermal gain due to extra voltage just not worth it )
memory clock is set to 500 which i find runs everything with no problems no matter the project the thermals and currant draws at these settings for one 5970 card are the gpu temps around 84 degrees constant and the VRMS 98 degrees and the currant draw is 56 amps

hope those stats help Zydor

best regards
Ian
----> Please Join team Scotland HERE
ID: 1844 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,408,008
RAC: 1,471
Message 1847 - Posted: 21 Dec 2011, 12:34:23 UTC - in response to Message 1833.  

Mikey, a pint of heavy hasn't changed in 25 years!! Edinburgh is brilliant, I was there for a week about 3 years ago, loved it!


OHHHH don't tell me that, it makes me want to go back now!!!
ID: 1847 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Chris S
Avatar

Send message
Joined: 2 Oct 11
Posts: 238
Credit: 386,678,038
RAC: 12,085
Message 1851 - Posted: 21 Dec 2011, 13:55:48 UTC
Last modified: 21 Dec 2011, 14:03:50 UTC

If its of any help to anyone ....

HD5850
Cat 11.10 Win7 64
Clock 775Mhz
Memory 500Mhz
GPU Load 97%
GPU temp 67C
Fan 47%
VDDC 1.0875V
Current 54A

The general comment is that the card runs a lot hotter on Moo! than it did on DNETC or does on Milkyway and Collatz. Moo! workunits obviously load the GPU a lot more.
ID: 1851 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Zydor
Avatar

Send message
Joined: 5 May 11
Posts: 233
Credit: 351,414,150
RAC: 0
Message 1855 - Posted: 21 Dec 2011, 15:38:21 UTC

Thanks Ian/Chris .... useful to check I wasnt going crazy. On 11.9 I am in the same ballpark - figures below. The difference on 11.12 was astonishing ... could be fingers and thumbs on my part, but it was wacky enough to pursuade me to stay of 11.11 and 11.12. It would seem some guys obver at MW and Collatz have had issues out of the usual band, with those two as well.

Dont have a Moo figure yet as the rebuilt boxes have only played at PrimeGrid so far (as such) - there I am on ( for PPS(Sieve) ):

840/175
1.0875v
GPU: 83 degrees
VRM: 112
Current: 47.9amps

Regards
Zy
ID: 1855 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Copycat-Digital for WCG*
Avatar

Send message
Joined: 11 May 11
Posts: 44
Credit: 291,412,341
RAC: 0
Message 1859 - Posted: 21 Dec 2011, 20:02:46 UTC

All ATI drivers 11.5 up hogs the CPU & use a full CPU core to feed the GPU

I'm running a 5850 & a 6950 both OCd to 860 but the Mem clock dropped to 650 with driver 11.4.
The CPU usage is down to 1%
If I use any driver from 11.6 & up the CPU usage jumps to 24% on a quad
This is nearly a full CPU core of the quad

I get very few failures just a lot of inconsistent run-times with the latest batch of WUs

Even that it is mid summer here with very little aircon & the heavy OC the GPU temps are below 78c deg

I told Teemu about this because DNETC was running fine with 11.5 up
He replied that he dont understand this cause Moo & DNETC was on the same software supplied by Dist Net

It seems that there is somewhere a big communication gap
ID: 1859 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile STE\/E

Send message
Joined: 2 May 11
Posts: 57
Credit: 250,035,598
RAC: 0
Message 1861 - Posted: 21 Dec 2011, 21:26:13 UTC

I'm using v11.6 on 3 different Box's with a 5850-5870 & a 6990, all 3 Box's only use 0.05 of a CPU Core & I'm running 4 CPU Wu's on all 3 Quads ...
ID: 1861 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Senilix

Send message
Joined: 11 May 11
Posts: 26
Credit: 50,059,517
RAC: 0
Message 1863 - Posted: 22 Dec 2011, 1:39:10 UTC

Same here ... am running v11.6 on a 5850 over/underclocked to 775/200 with CPU usage less than 1%.
I've tried v11.7 to v11.9 but all 3 versions consume a full CPU core.

Rumours say that v12.1 will cure the CPU usage problem but it's not released yet.
ID: 1863 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,408,008
RAC: 1,471
Message 1866 - Posted: 22 Dec 2011, 11:53:32 UTC - in response to Message 1855.  

Dont have a Moo figure yet as the rebuilt boxes have only played at PrimeGrid so far (as such) - there I am on ( for PPS(Sieve) ):
Regards
Zy


And while you do that I am taking advantage of the situation and am about to pass you in the total Boinc stats!!! Sorry old friend, but I am trying to make hay while the sun is shining!!!

129 Zydor 0 0 641,687 568,730,231 776,342 926,988 UK BOINC Team United Kingdom
130 mikey 299,621 267,622 1,738,329 568,031,413 1,550,901 1,523,415 The Final Front Ear United States

ID: 1866 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Zydor
Avatar

Send message
Joined: 5 May 11
Posts: 233
Credit: 351,414,150
RAC: 0
Message 1871 - Posted: 22 Dec 2011, 13:52:52 UTC

Wooooosh :)

Was it a Bird ..... Was it a plane ...... noooo it was Mikey right on the Game rofl :)

Regards
Zy
ID: 1871 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Teemu Mannermaa
Project administrator
Project developer
Project tester

Send message
Joined: 20 Apr 11
Posts: 388
Credit: 822,356,221
RAC: 0
Message 1882 - Posted: 23 Dec 2011, 17:11:16 UTC - in response to Message 1859.  

I told Teemu about this because DNETC was running fine with 11.5 up
He replied that he dont understand this cause Moo & DNETC was on the same software supplied by Dist Net


Only thing that could come to mind was that we are using build 518 of the D.Net client and they could have used buidl 517 or some other older version. Too bad we can't check anymore.. But we could test with older build to see if it fixes any of the odd bugs some are having.

Hmm, another five days gone since NeoMetal (and probably others) complained about the situation (which I agree). Where does all my days go. :(

Since I can't affect the work I get from upstream, I'll need to find other ways to compensate on this fragmentation and high packet counts. Only thing that's viable is using the credit levels even though that won't fix any of the bad effects on some of the systems (like the churning on multi-cards setups). :(

-w
ID: 1882 · Rating: 0 · rate: Rate + / Rate - Report as offensive
mikey
Avatar

Send message
Joined: 22 Jun 11
Posts: 2080
Credit: 1,844,408,008
RAC: 1,471
Message 1885 - Posted: 24 Dec 2011, 0:31:53 UTC - in response to Message 1871.  

Wooooosh :)

Was it a Bird ..... Was it a plane ...... noooo it was Mikey right on the Game rofl :)

Regards
Zy


Sorry Zy:

129 mikey 1,329,942 0 1,418,589 570,480,324 1,561,437 1,529,399 The Final Front Ear United States
130 Zydor 690,487 0 628,043 570,048,760 790,974 938,627 UK BOINC Team United Kingdom

Must be daylight savings time or something!
ID: 1885 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Previous · 1 · 2 · 3 · 4

Message boards : Number crunching : Faulty WUs


 
Copyright © 2011-2024 Moo! Wrapper Project